Images and text below show how to use & install the Super Claw

FOR PROPER MAINTENANCE OF THE SUPER CLAW, REFER TO SECTION 10 OF PURCHASE TERMS AND CONDITIONS

Installed Super Claw

This image illustrates the proper installation of the Super Claw.

Components of the Super Claw

Each LABOOMA is delivered with 4 Super Claws (Your choice of Red, Black, or Silver), and all necessary hardware.

  • 4x Super Claw with high friction anti-slip insert
  • 8x Stainless steel M8 bolts
  • 8x Stainless steel Lock washers
  • 8x Fastening Knobs

Component Order

This image shows the assembled order of the Super Claw components.

The Lockwasher

The Stainless steel bolt is inserted up through the bottom of the Super Claw and through the channel in the base of the LABOOMA skibox. Note that the Lockwasher is to be placed into of the interior side of the channel and over the M8 bolt.

Securing the Super Claw

Place each Fastening Knob onto the M8 bolts and tighten; alternating between each knob until hand tight.
IMPORTANT: The knobs must be tightened incrementally in order to maintain a level position of the Super Claw front and back. Take care that the Fastening Knobs are not cross-threaded and are hand tight with an additional 1/2 turn to finish.

Installed images of the Super Claw showing correct positioning